BJTKW - 420A SEMI-ENAMEL TINT BASE
- MSDS: BJTKW
- Manufacturer: VAN SICKLE PAINT MFG COMPANY
- Product Name: 420A SEMI-ENAMEL TINT BASE
- National Stock Number: 8010-00F014011
Product Identification
Product ID:420A SEMI-ENAMEL TINT BASE
MSDS Date:02/19/1986
FSC:8010
NIIN:00F014011
MSDS Number: BJTKW
Responsible Party
LINCOLN, NE 68501
Emergency Phone: (402) 476-6558
Info Phone: (712) 737-4993
Cage: VANSI
Contractor
Telephone: (712) 737-4993
Cage: VANSI
Ingredients
MINERAL SPIRITS, PETROLEUM SPIRITS
CAS: 64475-85-0
RTECS: PY8240000
Fraction By Weight: 20%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
APCO 140
Fraction By Weight: 5%
ACGIH TLV: 25 PPM
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: RESPIRATORY IRRITATION.
EYES: IRRITATION & DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: RESPIRATORY IRRITATION. EYES:
IRRITATION & DAMAGE.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/WATER FOR 15
MINS. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:104F
Extinguishing Media:CO2, DRY CHEMICAL, FIRE FOAM
Fire Fighting Procedures:WATER IS UNSUITABLE, BUT USE WATER TO KEEP
FIRE-EXPOSED CLOSED CONTAINERS COOL. WEAR SELF-CONTAINED BREATHING
APPARATUS.
Unusual Fire/Explosion Hazard:COMBUSTIBLE LIQUID
Accidental Release
Spill Release Procedures:REMOVE ALL IGNITION SOURCES. VENTILATE AREA.
USE NON-SPARKING TOOLS.
Handling
Handling and Storage Precautions:AVOID BREATHING OF VAPORS. DON'T STORE
NEAR HEAT, SPARKS, OR FLAME. AVOID FIRE, BURNING, & WELDING. REMOVE
ALL IGNITION SOURCES.
Exposure Controls
Respiratory Protection:IN CONFINED AREAS OF POOR VENTILATION. USE
CANISTER GAS MASK OR SELF-CONTAINED BREATHING APPARATUS.
Ventilation:PROVIDE GOOD MECHANICAL VENTILATION.
Protective Gloves:NONE REQUIRED
Eye Protection:SAFETY GLASSES OR GOGGLES
Supplemental Safety and Health
WT/GAL: 11 LBS.
Chemical Properties
Boiling Pt:B.P. Text:311-380F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME, & IGNITION
SOURCES
Hazardous Decomposition Products:CO
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. COMBUSTIBLE LIQUID.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.